Rockwell Automation GuardPLC and INView Message Display

hitesh

Member
H
Join Date
Feb 2005
Posts
25
Has anyone managed to communicate to a Inview display from a GuardPlc. Even through a intermediatary PLC. The Inviews are on ethernet network and so are the GuardPLCs. There are 3 processors and 2 displays on the network.

Hitesh
 
Guard PLC ver 4.1 supports Ethernet/IP communications but as far as I know it does not work with HMIs yet. But you can send data to the ControlLogix over Ethernet/IP and use it as a bridge.
A141245024 - Guard PLC to ControlLogix Ethernet/IP communications

 

Similar Topics

A
Rockwell Automation Process Objects Library - Auto Discovery
I noticed in Rockwell AOIs, they add a BOOL Output parameter at the end of the "Parameters" list of each AOI that carries the same name as the...
Replies
1
Views
81
cardosocea
C
S
Rockwell Automation 1769-L36ERMS PLC LITERAL STRING
Hello Guys, I am using 1769-L36ERMS PLC by Rockwell which doesn't let me MOV or COP literal text into string datatype? i very well know the...
Replies
13
Views
402
Shivsrikakolum
S
B
Does Rockwell Automation have an Input that will receive an input from a Load Cell
Good Afternoon , Does Rockwell Automation have an Input Card , maybe in the 1734 series , or CompactLogix series that will receive signals...
2
Replies
15
Views
860
busarider29
busarider29
R
Help with Rockwell Automation Ladder Logic for Max Height & Peak Detection
Hi everyone, I'm working on a project that involves using a Keyence LR-X100 sensor in Studio 5000 V35 ladder logic to determine the object's...
Replies
4
Views
683
creativepaper
C
M
Time Sync problem (Rockwell Automation)
I have a problem with time sync working in this topology. I have a plc with grandmaster clock controlling motion groups. I wanted to add kinetix...
Replies
7
Views
1,056
muusic_man
M
Back
Top Bottom