Good Afternoon ,
I have an older Panelview Plus and do not have the application . I'm in the process of re-doing the HMI application from scratch . I took notice that they have several timers in this RS Logix 5000 software working with a Numeric Input Enable ( In FactoryTalk View ) . Of course the time base in RS Logix 5000 is .001. So 60,000 would be 60 seconds.
The problem that I'm having is , with the previous HMI and it's Numeric Input Enable , they can type in 60 for 60 seconds , and it changes to 60,000.
They type just 62 and the timer changes to 62,000 , etc.
With what I have set up with my Numeric Input Enable I need to enter 60,000 fot the timer to change to 60,000 , etc.
What do you think they did different ? RTO " CIP_Cycle_1 " is just the Preset for that RTO Timer . It is not a modified tag or anything like that .
Thanks so much in advance ,
I have an older Panelview Plus and do not have the application . I'm in the process of re-doing the HMI application from scratch . I took notice that they have several timers in this RS Logix 5000 software working with a Numeric Input Enable ( In FactoryTalk View ) . Of course the time base in RS Logix 5000 is .001. So 60,000 would be 60 seconds.
The problem that I'm having is , with the previous HMI and it's Numeric Input Enable , they can type in 60 for 60 seconds , and it changes to 60,000.
They type just 62 and the timer changes to 62,000 , etc.
With what I have set up with my Numeric Input Enable I need to enter 60,000 fot the timer to change to 60,000 , etc.
What do you think they did different ? RTO " CIP_Cycle_1 " is just the Preset for that RTO Timer . It is not a modified tag or anything like that .
Thanks so much in advance ,