stevelawson
Member
- Join Date
- Feb 2004
- Posts
- 115
Hi all, & a happy New Year.
it's been a long long time since on the site, & true to form I need your help once again.
I have been tasked with getting the above mentioned Controller working. Apparently it was fitted more than 12 months ago but didn't ever work & the process has been moved to a substitute Tank, now it now needs to be resolved.
everything appears to be correct with the wiring but the display just shows LL in the main display & a 50 bottom right of display, I am assuming LL is lower limit but not sure. I can increase or decrease the 50 & get the heating to switch on, but nothing else.
I have downloaded a datasheet & had a little play, but I am a little confused.
I can only seem to get 2 conditions.
S. Loc safety lock code.
A.Loc advanced configuration lock code.
The manual says to press the * key & select yes to do a factory reset, but this doesn't do anything. I press * but don't get any other options. I have tried pressing all 3 buttons simultaneously but nothing. Pressing * & the up or down arrows toggles between S.Loc & A.Loc. & allows me to scroll
between 0 - 9999. I an thinking that whoever fitted this Controller has entered a code & that's why I can't get any further. Hence, that's why I want to try a factory reset.
I am struggling to get any further, the manual is like War & Peace & I just cannot follow it. I am only trying to set a min / max set point for switching the heat on & off.
I hope I have explained myself properly & that one of you wonderful Control superstars can offer me an idiots guide to entering the basics.
Kind regards.
Steve.
it's been a long long time since on the site, & true to form I need your help once again.
I have been tasked with getting the above mentioned Controller working. Apparently it was fitted more than 12 months ago but didn't ever work & the process has been moved to a substitute Tank, now it now needs to be resolved.
everything appears to be correct with the wiring but the display just shows LL in the main display & a 50 bottom right of display, I am assuming LL is lower limit but not sure. I can increase or decrease the 50 & get the heating to switch on, but nothing else.
I have downloaded a datasheet & had a little play, but I am a little confused.
I can only seem to get 2 conditions.
S. Loc safety lock code.
A.Loc advanced configuration lock code.
The manual says to press the * key & select yes to do a factory reset, but this doesn't do anything. I press * but don't get any other options. I have tried pressing all 3 buttons simultaneously but nothing. Pressing * & the up or down arrows toggles between S.Loc & A.Loc. & allows me to scroll
between 0 - 9999. I an thinking that whoever fitted this Controller has entered a code & that's why I can't get any further. Hence, that's why I want to try a factory reset.
I am struggling to get any further, the manual is like War & Peace & I just cannot follow it. I am only trying to set a min / max set point for switching the heat on & off.
I hope I have explained myself properly & that one of you wonderful Control superstars can offer me an idiots guide to entering the basics.
Kind regards.
Steve.
Last edited: