dmaintenance
Member
Hi All,
new member and hoping you guys have the answer!!!
Im working on a Lauer HMI PCS 090 plus and Allan Bradley slc503 PLC setup thats all working fine.
I have a the PCSprowin 8.0 thats fine and connects using my really old laptop via the standard onboard com port. No connection issues.
I have a newer laptop that has no onboard com port as is the norm.
I have bought 3 different usb com port adapters, even a belkin and none communicate with the PCS.
Now i have a new PCMCIA card com port adapter and still the new laptop gets the same response, "PCS does not reply, check com port".
well after hours of changing settings, roll back of XP sp3 to sp2 as that is what the old lappy uses, still no connection.
All settings are the same in device manager.
HELP!!!!!!
yours with crossed fingers for a reply
Gavin.
15.17
08/05/12
new member and hoping you guys have the answer!!!
Im working on a Lauer HMI PCS 090 plus and Allan Bradley slc503 PLC setup thats all working fine.
I have a the PCSprowin 8.0 thats fine and connects using my really old laptop via the standard onboard com port. No connection issues.
I have a newer laptop that has no onboard com port as is the norm.
I have bought 3 different usb com port adapters, even a belkin and none communicate with the PCS.
Now i have a new PCMCIA card com port adapter and still the new laptop gets the same response, "PCS does not reply, check com port".
well after hours of changing settings, roll back of XP sp3 to sp2 as that is what the old lappy uses, still no connection.
All settings are the same in device manager.
HELP!!!!!!
yours with crossed fingers for a reply
Gavin.
15.17
08/05/12