Rs232 to ttl din rail
- Thread starter abishur
- Start date
BryanG
Member
They are such small devices it seems a shame to take up DIN rail space.
Typical converter:
https://oceancontrols.com.au/COV-201.html
This one will fit in to standard DB9 plug housing:
https://www.artekit.eu/products/accessories/ak-rs232/?gclid=CO7BpL6a_tQCFUYcGwod8QYPqQ
This one you could do with a DIN rail clip and a couple of cable ties:
https://www.commfront.com/collectio...s232-to-ttl-3-3v-converter?variant=9208633219
If you absolutely must have it DIN rail mountable:
https://freitag-elektronik.de/converters/
Typical converter:
https://oceancontrols.com.au/COV-201.html
This one will fit in to standard DB9 plug housing:
https://www.artekit.eu/products/accessories/ak-rs232/?gclid=CO7BpL6a_tQCFUYcGwod8QYPqQ
This one you could do with a DIN rail clip and a couple of cable ties:
https://www.commfront.com/collectio...s232-to-ttl-3-3v-converter?variant=9208633219
If you absolutely must have it DIN rail mountable:
https://freitag-elektronik.de/converters/
Similar Topics
I have a few quickpanels on some older equipment. Connected to GE Fanuc 90-30 PLCs.
I have went through 4 of the MI-CAB-C49 cables over the past...
i have an device which can support serial (RS485,RS232),CAN protocol . i want to connect it to an existing MIB 1553B bus ,what device will I need...
Hello:
I have to connect a RS232 Modbus RTU slave that only has Tx, Rx and GND signals to a Modbus RTU master.
However, all RS232 to RS485...
Hi to everybody. I need to read the first 12 characters of the message that a barcode reader sends to the ascii card (1734-rs232 ascii) and I...
I have wasted a week trying to figure out how to connect an SLC5/03 with my laptop.
I do not have and can not Buy the 1747 UIC and PC3 cables.
I...
