Hi all
I'm trying to establish communication between a L43 CPU and a PLC of another brand (B&R).
At the moment I'm just trying to see "something" on RsLinx.
The situation is : The CPUs are on the same subnet, because with my laptop I can ping both the PLCs.
Configuring an Ethernet driver with RsLinx , pointing at the B&R CPU IP, i see the question mark with the red X.
Configuring EThernet IP Driver, I see only the AB modules
I'm using the same configuration of a "working" project, the only difference is that I have a L43 (with 1768 ENBT module) CPU and not a L18 CPU (integrated Eth)
Any suggestions?
thank you
I'm trying to establish communication between a L43 CPU and a PLC of another brand (B&R).
At the moment I'm just trying to see "something" on RsLinx.
The situation is : The CPUs are on the same subnet, because with my laptop I can ping both the PLCs.
Configuring an Ethernet driver with RsLinx , pointing at the B&R CPU IP, i see the question mark with the red X.
Configuring EThernet IP Driver, I see only the AB modules
I'm using the same configuration of a "working" project, the only difference is that I have a L43 (with 1768 ENBT module) CPU and not a L18 CPU (integrated Eth)
Any suggestions?
thank you
Last edited: