Harvey1687
Member
I have trasfered all my Rockewell software from an old computer to another. Can I transfer RSLinx Configuration?
RSLinx Configuration
- Thread starter Harvey1687
- Start date
Mickey
Lifetime Supporting Member
Yes, but you first have to back it up. See picture below
Harvey1687
Member
OP
Thanks.
Similar Topics
I have 2 PLCs. One is networked to our plant, and the other is networked to the first PLC via a 1756-EN2T.
I could easily get the second PLC...
Is there any way to script driver configuration instead of using the rslinx gui? It would be nice to just have scripts i can run for whatever...
Hello PLCS.NET!
I want to store my plant's RSLinx config on the network, so that it's standard across the table with multiple drivers in the...
Hello guys,
I am trying to get communication between pc and plc (Slc) through rslinx classic but it is always showing Testing mode:CRC(when I...
Hi All
Whenever i try to change the IP address of a compact logix PLC from RSlinx, this message appears to me "unable to read module's port...
