Hi everybody.
I have a problem discovering my devices using RSlinx.
My setup is:
- MicroLogix 1400 (192.168.132.2) connected via ethernet to GPRS gateway (192.168.132.1).
- Another MicroLogix 1400 (192.168.131.2) connected via ethernet to another GPRS gateway (192.168.131.1).
- PC with installed OpenVPN connected to server, which provids static IP adresses for GPRS gateways.
I made a simple program to communicate between PLCs using MSG instruction and is working fine. Also, I have a laptop (192.168.132.11) connected in 192.168.132.x subnetwork, with installed RSlinx. From my laptop I can se both PLCs in RSlinx, using "Ethernet devices" driver.
Problem is I would like to reach PLCs through RSlinx on my PC using OpenVPN. I can successfully ping both PLCs from my PC. I have found several threads here and tried using Ethernet/IP driver, or adding :EIP sufix on IP adresses in Ethernet devices driver, but no luck.
I kindly ask for some help regarding this matter.
I have a problem discovering my devices using RSlinx.
My setup is:
- MicroLogix 1400 (192.168.132.2) connected via ethernet to GPRS gateway (192.168.132.1).
- Another MicroLogix 1400 (192.168.131.2) connected via ethernet to another GPRS gateway (192.168.131.1).
- PC with installed OpenVPN connected to server, which provids static IP adresses for GPRS gateways.
I made a simple program to communicate between PLCs using MSG instruction and is working fine. Also, I have a laptop (192.168.132.11) connected in 192.168.132.x subnetwork, with installed RSlinx. From my laptop I can se both PLCs in RSlinx, using "Ethernet devices" driver.
Problem is I would like to reach PLCs through RSlinx on my PC using OpenVPN. I can successfully ping both PLCs from my PC. I have found several threads here and tried using Ethernet/IP driver, or adding :EIP sufix on IP adresses in Ethernet devices driver, but no luck.
I kindly ask for some help regarding this matter.