rslinx with pv1000

DMyers

Member
D
Join Date
Jan 2009
Location
Virginia
Posts
6
hello all, i have a pv1000 (standard terminal) with ethernet com port and a 5/03 processor ..... is there any way to bridge the 2 via the pc's serial and ethernet ports via rslinx clssic ? or any other way for that matter

thanks in advance
 
You asked about this the other day. The afore-mentioned NET-ENI module is the way to go.
I don't know about using the PC to bridge the two.
 

Similar Topics

D
RSLINX and PV1000 2711-T10C20 ser D
I'm trying to figure why RSLINX couldn't automatically detect my ethernet PV1000 with the "ether/IP" driver. I configured the "ethernet/IP driver...
Replies
6
Views
2,816
david90
D
H
RSLinx Enterprise Topic in FTLD, weird behavior
I don't have a whole lot of experience with RSLinx Enterprise or I guess it's also called FactoryTalk Linx. We have a Rockwell FTView SE based...
Replies
0
Views
25
harryting
H
H
RSLinx Bridge Configuration? Connecting through another PLC
I have 2 PLCs. One is networked to our plant, and the other is networked to the first PLC via a 1756-EN2T. I could easily get the second PLC...
Replies
3
Views
69
dmroeder
dmroeder
P
RSLinx Classic Network Dropout
Hi, I am working on a project, where I face a issue with respected to Network Dropout. The PLC is connected to a 16 port unmanaged switch, where...
Replies
7
Views
225
TheWaterboy
TheWaterboy
L
Resetting old RSLINX Master Disk floppy
Does Rockwell still offer reset codes for old school Master Disk floppy's? In a bind and need to reset the activation disk soon and to be pointed...
Replies
9
Views
264
LMDAVE
L
Back
Top Bottom