I want to put a new 1756-ENBT into an existing control logix setup that is running on version 10.xx, just to be able to connect to the processor over an Ethernet connection. Do I have to worry about the firmware on the new hardware being too high to use on my older system? I've looked around on rockwell's website and haven't see anything as of yet.
Also, a contractor one day told us he carried a preconfigured
1756-ENBT around with him and just plugged into a spare slot on the customer's backplane to communicate with the processor. So I'm guessing there is no need to configure the I/O of the processor if you are just using the ENBT to access the processor from the outside?
Also, a contractor one day told us he carried a preconfigured
1756-ENBT around with him and just plugged into a spare slot on the customer's backplane to communicate with the processor. So I'm guessing there is no need to configure the I/O of the processor if you are just using the ENBT to access the processor from the outside?