AllanJacobs Member A Join Date Aug 2011 Location Graham, North Carolina Posts 21 Jan 23, 2014 #1 I am running RSLogix 5000 v.19.11. I have a 1756 EN2T r5.7. The revs in my module definition only go to major rev 4. I have checked for an AOP but found none. Is there something else I need to do or am I missing something?
I am running RSLogix 5000 v.19.11. I have a 1756 EN2T r5.7. The revs in my module definition only go to major rev 4. I have checked for an AOP but found none. Is there something else I need to do or am I missing something?
AllanJacobs Member OP A Join Date Aug 2011 Location Graham, North Carolina Posts 21 Jan 23, 2014 #2 I have the keying disable so all is working I just want the setup Correct
cwal61 Member C Join Date Jan 2011 Location NC Posts 1,239 Jan 23, 2014 #3 update your eds files to include new module http://www.rockwellautomation.com/rockwellautomation/support/networks/eds.page?
update your eds files to include new module http://www.rockwellautomation.com/rockwellautomation/support/networks/eds.page?
AllanJacobs Member OP A Join Date Aug 2011 Location Graham, North Carolina Posts 21 Jan 23, 2014 #4 I had all my EDS's up to date, even uploaded from the device still does not show up .
Ken Roach Lifetime Supporting Member + Moderator Join Date Apr 2002 Location Seattle, WA Posts 17,483 Jan 23, 2014 #5 The EDS file doesn't matter; 1756-ENBT or 1756-EN2T modules are recognized by native RSLogix 5000 module profiles. You won't find the version 5 module profile in RSLogix 5000 v19. Just use the Compatible keying and everything will work.
The EDS file doesn't matter; 1756-ENBT or 1756-EN2T modules are recognized by native RSLogix 5000 module profiles. You won't find the version 5 module profile in RSLogix 5000 v19. Just use the Compatible keying and everything will work.
AllanJacobs Member OP A Join Date Aug 2011 Location Graham, North Carolina Posts 21 Jan 23, 2014 #6 Got it, Thanks