remullis Member R Join Date Oct 2012 Location Georgia Posts 179 Dec 20, 2022 #1 Any reason I would not have the Project Migrator selection for converting from plc 5 to CL? Thanks!
alan_505 Lifetime Supporting Member A Join Date Feb 2007 Location Melbourne,Victoria,Australia Posts 1,046 Dec 20, 2022 #2 I think it is a separate download, that’s how I got it.
remullis Member OP R Join Date Oct 2012 Location Georgia Posts 179 Dec 21, 2022 #3 The only version I could find is 2.0, but it says it is no longer available because it is embedded in the plc5 or slc500 if you are above rev 10. I don’t have the option with the plc5 “save as” either.
The only version I could find is 2.0, but it says it is no longer available because it is embedded in the plc5 or slc500 if you are above rev 10. I don’t have the option with the plc5 “save as” either.