RSLogix Emulate 5000 - Ethernet/IP module

[vinayakid]

Hi, I am trying to add "Ethernet/IP SoftLogix 5800 EtherNEt/IP" module in "RSlogix Emulate 5000 Chassis Monitor (Version16.03.00.42 (CPR 9))".
During this I got following error "Failed to create module proxy of type Ethernet/IP SoftLogix 5800 EtherNEt/IP in the slot".
Can anybody help me out to resolve this problem?

Thanks in advance

 

[Mark Buskell]

Emulate only accepts 2 types of modules. The simulation proccessor & the 32 SIM I/O module.

Ethernet communications is done with the very left module which is your RSLinx module.

 

[vinayakid]

The Emulate 5000 (Ver 16) has PCIC, PCID, Ethernet/IP modules in "create..." option amoungst others....

but the only module, I could not insert is "Ethernet/IP SoftLogix5800 Ethernet/IP!!