Hi people thanks in advance for your replies. I have a process which takes 3 hours for the product to get from start to finish. If there is a breakdown in the middle of the process enginners attend and the product before goes bad until the line is back on, the stagnant product has to be dumped when the line comes back. Its not about breakdowns i am after, but planned stoppages.After inspecting a piece of equipmet is about to break and we need to stop. Stop the infeed run the product just after the faulty equipment.Press a button on rsview to stop that particular equipment and isolate but not stop the process from then back. Production will start the line this gives the engineers to work assuming they will finish before the product gets to them. Restart and production. How quick can i use logix 5000 and rsview 32 to achive this?