Any help would be appreciated. Here's the setup....RSView 4.00 with no patches installed running on a PC with XP Pro. I also have RSLogix 5 on this machine. The PC is communicating to our PLC5s via a PKTX card on DH+. RSLogix works great. I'm trying to learn RSView and have had some success connecting a PV+ via RIO. Now I'm trying to achieve some joy with the DH+ driver. My problem is that I can't seem to get RSView to browse the DH+ network in my local tab. I'm assuming that it is a software conflict. RSLinx & RSLinx Enterprise are supposed to play nice together aren't they. I've tried all sorts of stuff but here's where I'm at - In my local tab I've added a shortcut, it's the PLC5 processor that is on our DH+ in our shop (test bench). I have added the DH+ driver with a unique address on our DH+ and set the Jumper ID to 0 as per our PKTX card, the baud rate is correct as per our DH+. When I right click on the DH+ driver and click on select browsing it seems to start browsing but I never able to see the other processors on the DH+. I've got the RSView DH+ blues.