Outrage
Member
Weird one, wondering if anyone has come accross this one before.
I have Mimic screen with a lot of animation on it, whenever I navigate off the screen and return, several of my animated objects (colour changes) have decided to change their colour despite the PLC integer value that drives the colour remaining the same. Eventually if I return to the screen a few times the status of these objects will return to the right colour, the colour is also still changeable if I change my integer register at the PLC. It appears to be some sort of screen update issue. The really strange thing is that they turn red which would correspond to an integer value of 4, I could maybe understand if they were turning grey which = 0 or error.
Also, it does seem to take sevaral seconds to update the screen when it's accessed.
The screen is a brand new Panelview Plus 1500 talking over ethernet to another brand new Compact logix processor.
Anyone have any ideas whats causing this?
Cheers,
Lee
I have Mimic screen with a lot of animation on it, whenever I navigate off the screen and return, several of my animated objects (colour changes) have decided to change their colour despite the PLC integer value that drives the colour remaining the same. Eventually if I return to the screen a few times the status of these objects will return to the right colour, the colour is also still changeable if I change my integer register at the PLC. It appears to be some sort of screen update issue. The really strange thing is that they turn red which would correspond to an integer value of 4, I could maybe understand if they were turning grey which = 0 or error.
Also, it does seem to take sevaral seconds to update the screen when it's accessed.
The screen is a brand new Panelview Plus 1500 talking over ethernet to another brand new Compact logix processor.
Anyone have any ideas whats causing this?
Cheers,
Lee