RTC in S7-200?
- Thread starter supporter
- Start date
Well I went to the Siemens' Product Support web-site, I got a copy of the S7-200 System Manual, and I looked at Appendix A - Technical Specifications. It listed 5 different CPUs (S7-221, -222, -224, -224XP and -226) and gave the information about a real-time clock for each one.
And the info was [secret] 221 and 222: plug-in optional cartridge; 224, 224XP and 226: built-in[[/secret]
Oh come on, I've got to make you do something for this answer... !
Regards
Ken
And the info was [secret] 221 and 222: plug-in optional cartridge; 224, 224XP and 226: built-in[[/secret]
Oh come on, I've got to make you do something for this answer... !
Regards
Ken
RMA
Member
Hi Ken, that's real neat! It still only took me about 2 secs to fathom out (guess!) how to make it visible though!
Similar Topics
I have a Micrologix 1200 with a "Real Time Clock" installed. I didn't realize that the clock registers are read only and I need to be able to...
Hi Can anyone help i am using a micrologix1200 plc connected to a panelview component hmi.I need to allow the operator to set 2 on and off times...
Hey
How do i set the time i my RTC. The button "set time and date" dosent seam to work. I have tryed to do i manuel, but it dossent work. Please help
Hi
Can anyone tell me how or where I can find the address values for a RTC for a ML1200.
Generally I want to know does the Hours start at 0...
I have some logic that I have written within a 5380 series controller that tracks the time an event is started, while the event is running an RTO...