maintpro
Member
I having trouble getting my Panelveiw 550 to display the proper total on the screen. I am trying to display a running total of gallons filled in .01 increments. The problem that I am having is that the math registers keep going to -32767 and then decreases to 0 before going to +32767. How can I keep this from happening.
The math setup in my program (micrologix 1500) is that I will take the current value from my high speed counter and divide it by the preset. I want the result to display on the panelview. How can I set up the program or controller to stay above 0?
The math setup in my program (micrologix 1500) is that I will take the current value from my high speed counter and divide it by the preset. I want the result to display on the panelview. How can I set up the program or controller to stay above 0?