Hello guys,
I need help. My thesis is a Length Sorting PLC Trainer, I used ball-screw type linear positioner and it is run by a Vexta stepping motor 2.25 Volts, 1.5 A, 2 phase with a 12VDC, 2A stepper motor driver. In the positioner, a microphotosensor is mounted which is used for length/sheet scanning; while at the end of the positioner is a sprocket with another photomicrosensor responsible for pulse counting.
Now I am having a hard time creating a program to run the motor using the CPU212. =(
I need help. My thesis is a Length Sorting PLC Trainer, I used ball-screw type linear positioner and it is run by a Vexta stepping motor 2.25 Volts, 1.5 A, 2 phase with a 12VDC, 2A stepper motor driver. In the positioner, a microphotosensor is mounted which is used for length/sheet scanning; while at the end of the positioner is a sprocket with another photomicrosensor responsible for pulse counting.
Now I am having a hard time creating a program to run the motor using the CPU212. =(