S5 CPU 95 to OP 77B

ariek dwi putro

Member
A
Join Date
Apr 2008
Location
at ngawi
Posts
8
Hi all...i have problem with my project,i can't connect PLC SIMATIC S5 CPU 95 with OPERATING PANEL SIMATIC OP 77B...?

1.can't i use this OP with this PLCs?
2.i want this PLC use to control speed of DC Drive (MENTOR II) via Analog Input/Output,i just need how to begin?

any help would be highly appreciated(y) ...
thank you all...
 

Similar Topics

P
s7-226 CPU WITH HMI OP77B communicating slow
We are using S7-226 CPU with HMI OP77B.The message upgradation and analog input is slow for 1 sec.Can any expert can give us hint how to make HMI...
Replies
1
Views
2,447
Homer_BL
H
J
90/30 CPU Upload
I have a 90/30 CPU331. I am trying to upload the program out of the CPU and keep getting an error uploading the logic. Error 8262: Error...
Replies
6
Views
90
James_TC
J
H
Siemens CPU 317-2DP Firmware Version V2.1.8
Hello, I have a CPU 317-2DP Firmware Version V2.1.8. In TIA Portal only V2.6 is available, and there is no option to upgrade FW. Then I open it...
Replies
9
Views
176
hafizzz_ahmad
H
Z
PLC CPU Unit Upgrade
Hello all, I have a one problem. I would like to upgrade Mitsubishi PLC Q02 to Q03UDVCPU. I have Q02 program and I change to PLC type and try to...
Replies
7
Views
175
parky
P
M
DL205-1 CPU Monitoring
Hello everyone! I need to connect to a DL205-1 CPU and, as far as I know, I need to use DirectSOFT 6 software for the connection. Is anyone...
Replies
1
Views
77
bernie_carlton
bernie_carlton
Back
Top Bottom