alexmcsheffrey
Member
Hi can anybody give me some advise on setting up the alarm page on the s7 1200 plc and basic hmi.I have set my alarm word to mw150 and have a input setting a alarm bit m150.1.i have set the alarm trigger in hmi alarms to the tag associted with mw150 and set the trigger to 1 and entered a message.I also have put the alarm view on a hmi page.
problem is when i set the alarm bit m150.1 on in the plc there is no message in the alarm view??
problem is when i set the alarm bit m150.1 on in the plc there is no message in the alarm view??