S7-1500 profinet comm to a Vacon100

pallesen

Member
P
Join Date
Sep 2007
Location
Copenhagen
Posts
3
Hello and HELP!!!

I have a Siemens S7-1500 i TIA and I need to communicate with a Vacon 100 over ProfiNet.. But I have no clue how to do it!!! :oops:
How do I set up the communication, to start / stop, setpoint, reading speed, alarms, etc.,

I have looked in the manual...but I can not find head or tall in it!

Best regards Henrik
 

Similar Topics

D
Siemens S7-1500, OB35 and Profinet question
We've got very fast machine whose position controlled by interrupt OB35 set at 2ms. For position reading we use Temposonic connected to TM...
2
Replies
19
Views
2,517
mk42
M
B
Disable a profinet node Siemens 1500 TIA
Hello all, New to siemens. we have one VFDive which has failed and we need to pull out of the existing network. What exactly needs to be done in...
Replies
3
Views
3,958
JesperMP
JesperMP
A
S7-1500 PROFINET IO Error: "Hardware component user data failure"
Hello to PROFINET IO gurus. Has anybody seen this kind of error logged in an S7-1500 diagnostics buffer? This PLC application has two PROFINET IO...
Replies
4
Views
4,887
AlfredoQuintero
A
A
S7-1500 as a Profinet Device
I am looking at various option of exchanging data between a Bosch MTX controller and a Siemens S7-1500. The Bosch supports being a Profinet...
Replies
5
Views
2,363
Archie
A
K
use Simotion D ethernet port as gate to access S7-1500 plc program
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
88
mk42
M
Back
Top Bottom