s7 200 compiler error when downloading

[alexmcsheffrey]

Hi all
I have a problem downloading to a s7 200 plc. Firstly my customer recieved a brand new machine from china which they could not get working, when i had a look in the plc it was blank!! so the manufacturer emailed the program over.
My customer tried downloading it and when it finished downloading came up a compiler error.
Unfortunately i was working away so they got the manufacturer to send a pre-programmed plc. This had some success but still the machine would not run.
I have just been to site and could upload and go online and monitor the ladder.I wanted to modify the ladder slightly so did my mod and tried to download, agan came up compiler error.
Had a look at the plc file and it said ther was a problem with the code in network1 minor error. Had a look at network 1 and its simply a input to a output. Any way deleated that network and the problem goes to network2?
Problem now is there is no program in the PLC.
I am not 100% familiar with s7 200 am i missing something silly?

Your help would be appreciated

regards
Alex

 

[Mike_RH]

Can you post the code?

 

[BryanG]

I would guess that you maybe need to install Chinese language on your computer. Search here for stuff on S7-200CN.

 

[hagos]

Chinese S7-200

Dear Folks,

BryanG is right, you need a Chinese version of the MicroWin to deal with CPU's that end with the letters CN,I faced a lot of problems with those CPU's when I use the standard version of the MicroWin.

Hagos