Hi.We used S7-300 Cpu and MM440 inverter on profibus comm(Step-7 V5.5).Nowadays we want to use G120C DP Sinamics inverter instead of MM440.I looked for on net simple example but result is not good.Sinamics G120C DP version C02/V4.7.I would be grateful if that assistance.Thanks in advance...
s7-300 and G120 Sinamics
- Thread starter tulip
- Start date
Similar Topics
in allen bradley kinetix 300 drive first E31 error shows after resting drive E11 error occurs need solution to reset E11 fault code
Hi,
I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why?
Could...
So basically i have 2 queries :
1. I have a program file of S7-300 PLC which i want to migrate in RSLogix500.In short i want to convert my simatic...
Hi i using Kinetik 300 2097 driver control by EIP with using move absolute and incremental for motion , but i want to add same driver and motor as...
Hey all, first time poster here.
I am wondering if anyone has tried using a Keyence SR-X300 barcode scanner to a Micrologix 1400.
Keyence sent...