s7 -300 siemens PLC Communication with WINSPS-S7 Software

hinddhindsa

Member
H
Join Date
Mar 2013
Location
www.plckart.com
Posts
193
Dear Friends, i have simatic s7-300 CPU317-2DP, along with USB/MPI+ communication cable.
can we use WINSPS-S7 Software MHJ-Software to communicate with the PLC.
Please update me if anybody have experience.
Thanks
 

Similar Topics

M
Siemens S7 300 PLC replacement issue
Hello. There is a problem with Siemens S7 300. We got a replacement PLC but it does not run the program from the MMC. The new PLC is dated 2011...
Replies
3
Views
692
Rob...
R
L
Siemens S7-300 PLC software
Is there a version of Siemens software that can be used to view only the installed program logic and diagnostic buffer to determine system and bus...
Replies
5
Views
2,096
JesperMP
JesperMP
A
Siemens PLC (S7-300) unable to detect the connected node via CANBUSS
Dear Friends; We have a BOBST 1228 flexo printing machine having Siemens S7-300 PLC (6ES7 318-3EL01-0AB0) and Lenze 9300 and 9400 drives. The...
Replies
3
Views
2,317
AB2005
A
A
The Date and Time of the S7 300 PLC from Siemens gets corrupted again and again
I set the Date and Time of the S7 300 PLC equal to that of my PG. But after a few days I found that the date and time were not what they should...
Replies
0
Views
1,919
amit-k
A
S
Siemens S7 300 PLC Sample Program
Hi Can any one give me some of sample project file for Siemens S7 300 PLC that I can practice at home. Thanks in Advance
Replies
2
Views
2,802
sazirul
S
Back
Top Bottom