S7-300 with Jumo SVS 3000 Plant Visualization Software

pietervdb

Member
pietervdb
Join Date
Jun 2006
Location
Ghent, Belgium
Posts
67
Hello,

A customer of ours has an existing project with a S7-200 PLC, but now he wants to convert this PLC to a S7-300 with some MP panels but the existing communication between the PLC and the SVS software still needs to work.

They use the PPI port 0 on the S7-200 to communicate with an USB – RS485 convertor.

I don’t know if this is possible with a S7-300 MPI port.

Can it be done?
 

Similar Topics

U
allen bradley kinetix 300 E11 fault code
in allen bradley kinetix 300 drive first E31 error shows after resting drive E11 error occurs need solution to reset E11 fault code
Replies
4
Views
147
robertmee
R
R
Modbus Master Siemens S7-300 - OB35?
Hi, I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why? Could...
Replies
10
Views
123
Lare
L
A
Migrating Program from S7-300 to RSLogix500 & Migration from CompactLogix to RSLogix500
So basically i have 2 queries : 1. I have a program file of S7-300 PLC which i want to migrate in RSLogix500.In short i want to convert my simatic...
2
Replies
15
Views
284
geniusintraining
geniusintraining
A
Kinetik 300 -2097-V33PR3 Master and Slave Configuration
Hi i using Kinetik 300 2097 driver control by EIP with using move absolute and incremental for motion , but i want to add same driver and motor as...
Replies
0
Views
72
Ansonkiek
A
andyvanosdol
Keyence SR-X300 to Micrologix 1400
Hey all, first time poster here. I am wondering if anyone has tried using a Keyence SR-X300 barcode scanner to a Micrologix 1400. Keyence sent...
Replies
0
Views
83
andyvanosdol
andyvanosdol
Back
Top Bottom