S7-300 with TP170 Micro or TP177 Micro

isteak007

Member
I
Join Date
May 2009
Location
NewYork
Posts
216
Dear Expert,

Is it possible to use s7-300 PLC with TP-177 Micro or TP-170 Micro?
If yes, How?
if No, Why?


Do i need some special device or cable to connect?


Thanks!
 

Similar Topics

U
allen bradley kinetix 300 E11 fault code
in allen bradley kinetix 300 drive first E31 error shows after resting drive E11 error occurs need solution to reset E11 fault code
Replies
3
Views
93
Uttam_994
U
R
Modbus Master Siemens S7-300 - OB35?
Hi, I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why? Could...
Replies
10
Views
119
Lare
L
A
Migrating Program from S7-300 to RSLogix500 & Migration from CompactLogix to RSLogix500
So basically i have 2 queries : 1. I have a program file of S7-300 PLC which i want to migrate in RSLogix500.In short i want to convert my simatic...
2
Replies
15
Views
279
geniusintraining
geniusintraining
A
Kinetik 300 -2097-V33PR3 Master and Slave Configuration
Hi i using Kinetik 300 2097 driver control by EIP with using move absolute and incremental for motion , but i want to add same driver and motor as...
Replies
0
Views
65
Ansonkiek
A
andyvanosdol
Keyence SR-X300 to Micrologix 1400
Hey all, first time poster here. I am wondering if anyone has tried using a Keyence SR-X300 barcode scanner to a Micrologix 1400. Keyence sent...
Replies
0
Views
80
andyvanosdol
andyvanosdol
Back
Top Bottom