Hey everyone. I'm using Windows 7 in XP Mode, and I've successfully installed S7 Basic (TIA Portal). However, I'm having trouble communicating with my laptop and the PLC (Siemens 1200 series).
I've set up my IP address correctly and when I do an IP config in XP mode, it gives me the correct IP address, but when I try to ping the PLC, I get nothing.
Any other places I should be looking in the settings to get these two to talk to one another?
Thanks!
Brian
I've set up my IP address correctly and when I do an IP config in XP mode, it gives me the correct IP address, but when I try to ping the PLC, I get nothing.
Any other places I should be looking in the settings to get these two to talk to one another?
Thanks!
Brian