S7 PLC Multihop

destination unknown

Member
D
Join Date
Jun 2010
Location
Ireland
Posts
118
With Rockwell PLC's it is possible to go online with a remote PLC via multiple networks jumps e.g. PC ->(ENET1)-> PLC1 -> (ENET2) -> PLC2

Is there a method to do this with S7 PLC's?

See attached for a crude depiction.

Multihop.png
 

Similar Topics

H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
2
Views
33
hafizzz_ahmad
H
L
Beckhoff PLC and EDS
Hi, I'm trying to import a Rockwell/AB EDS to Beckhoff but I'm not sure how to import/install the EDS. It is a PowerFlex 525 EDS. Is there a way...
Replies
1
Views
64
busarider29
busarider29
R
Issue with mitsubushi melsec PLC modbus QJ71MT91
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows plc...
Replies
0
Views
44
raheelredben
R
C
0-20mV Loadcell with 2080-TC card Micro850 PLC
Hi everyone. I'm trying to read values from a Loadcell with a 2080-TC card. I know the 2080-TC is a thermocouple card but it reads millivolts that...
Replies
4
Views
84
chikhim
C
P
Looking for a personal PLC tutor, should I post in the PLC job ad section
Hello All, Please direct me to post to the right page. I am really new to PLC, and want to find a tutor who is familiar with Automation Direct's...
Replies
6
Views
217
jaden
J
Back
Top Bottom