S7 program : How to solve transport situation

arocon

Member
A
Join Date
Oct 2006
Location
Dubai
Posts
171
I need to send product data to the robot. When product is produced then from another system i got product data . I kept those data in a S7 data block and immedidately i send data to the robot through profibus. But robot is a little far away and product is transported to the robot through conveyer system. I am sending data to the robot when product is produced. But before current product is reaching to the robot if another product is produced then this product data will be overwritten. In this scenaro what i need to do in the program ? Could anyone reply it will be great help.

Thanks
 

Similar Topics

I
How Do I solve program compilation issue on micro logix starter lite/emulator
Hi Friends I just started with Allen Bradley's micro logix starter lite/SLC500 emulator. I was following an info/instruction on how to start...
2
Replies
16
Views
12,918
LlndPrkr
LlndPrkr
M
HMI Connection - {::[PLC1]Program:#1.#3.Abc.Efg} What is the #1.#3 ?
I'm having a hard time either remembering or figuring this out. I have a PLC program and the associated HMI program. I know what this means...
Replies
4
Views
100
plvlce
P
R
How to read/write changes to an existing AB FTView SE program
Hello, I am fairly experienced programming and modifying existing FTView ME programs. I have also used FTView SE to make modifications to a...
Replies
5
Views
131
Operaghost
Operaghost
O
ccw ladder program
my ccw softwer stops working when i add and try to open a ladder program.
Replies
0
Views
79
Ousmane Dia
O
T
Anyone here work for Johnson Controls now or in the past?...need help with OLD PLC program
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
166
TheCaptain2000
T
Back
Top Bottom