S7300 And Mm440

[ABDELAAL]

HI ALL ,

1-WOULD YOU PLEASE TELL ME WHAT ARE THE PARAMETERS OF THE MM440 TO BE CHANGED TO MAKE COMMUNICATION WITH S7300 313C 2DP ?

2-IF ANY OTHER THINGS I SHALL DO AFTER CHANGING THE PARAMETERS PLEASE TELL ME WHAT IT IS IT .

3-IS it right to vary the control word of mm440 by normal load and transfer ??

with regards

 

[manmeetvirdi]

hi there
1)P700=6,P1000=6, P918=Profibus address which u have defined in hardware configuration
2)After changing parameters, just run it !!
3)Load transfer will work as good as SFC 15/14

There is a file MM440 parameters in download section of this site.
Under siemens folder





(Note:Liverpool is better then Arsenal)

 

[ABDELAAL]

thanks for help

dear manmeetvirdi ,

1-thank you for your reply . Parameters you have mentioned ,I've already entered it before you tell me ,but the MM440 didn't work properly.

Note:-
not true. (no other club is better than ARSENAL)

with regards

 

[EKBist]

FAQ: MM4: PROFIBUS getting started

http://support.automation.siemens.com/WW/view/en/26435636

Examples
http://support.automation.siemens.com/WW/view/en/26435638

 

[ABDELAAL]

problem is solved

dear EKBist ,

thank you for reply. that webpage helped alot