Hello,
I have a micrologix 1400 and am using a scale instruction to control my analog output. This is working fine but now I need to reverse the way it controls. I have a input value that ranges from 80-120,instruction input min.=80,max=120,output scale is 0-32760(close to this value,not in front of me so I'm guessing).Basically when I enter 80 into input my output is at 0. Is there a method for reversing this. I am needing to make the input value of 80 to make my output be at max. Output 32760.
I have a micrologix 1400 and am using a scale instruction to control my analog output. This is working fine but now I need to reverse the way it controls. I have a input value that ranges from 80-120,instruction input min.=80,max=120,output scale is 0-32760(close to this value,not in front of me so I'm guessing).Basically when I enter 80 into input my output is at 0. Is there a method for reversing this. I am needing to make the input value of 80 to make my output be at max. Output 32760.