TimD
Lifetime Supporting Member
Hello,
Got some help wiring and setting up my flowmeters on these threads. Now, I must scale the inputs. I've done this many times with the SCP block for analog inputs, but I'm sure the pulse input method is different.
I will be dividing my flow rates by minute, then totalizing, then resetting the accumulator for the next minute.
I have a flowmeter with a K factor, factory calibrated.
I need to scale so that my instantaneous 60 second flow value can properly be added to my totalizer variable. I think I have an idea on what to do, just need a little help on the how part!
Thanks All,
Tim
Got some help wiring and setting up my flowmeters on these threads. Now, I must scale the inputs. I've done this many times with the SCP block for analog inputs, but I'm sure the pulse input method is different.
I will be dividing my flow rates by minute, then totalizing, then resetting the accumulator for the next minute.
I have a flowmeter with a K factor, factory calibrated.
I need to scale so that my instantaneous 60 second flow value can properly be added to my totalizer variable. I think I have an idea on what to do, just need a little help on the how part!
Thanks All,
Tim