scaling

Hi

I have not worked much with twido
But you can just use a divide and multiply instructions
And this should work for you

Donnchadh
 

Similar Topics

T
Dynamix 1444 to OSI scaling
I have everything set up for vibration monitoring with the code in Controllogix 5000. The thing is that I am not able to read values SCADA in mm/s...
Replies
0
Views
36
TM44
T
R
1746-NI8 scaling problems
Hi, having some issues with scalings (SCP commands) with some Vegapuls 65 guided wave radar level transmitters. I've set the min/max in the...
Replies
5
Views
226
Robb B
R
C
Tank water level scaling in PLC
I want to measure the tank level and get the sensor output to the PLC. Below are the details : Tank Height =0 - 3m, the sensor is stalled 0,2m...
2
Replies
15
Views
715
colesha
C
R
Allen-Bradley Analogue Input 1756-IF16 Scaling
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
Replies
14
Views
431
Rich0147
R
D
simaticnet opc, linear scaling?
I know nothing about simaticnet OPC server. I do know Kepware. I would only ever scale raw to engineering in the PLC, but it is possible to scale...
Replies
5
Views
237
JesperMP
JesperMP
Back
Top Bottom