g.mccormick
Lifetime Supporting Member
I've never dealt with Scheider PLC before, but I am working on quoting a system for a customer. The basic system will have local and remote racks of IO. A 580 CPU will be in the first rack, remote racks have ethernet comms modules.
The programming in the CPU should not be much, basically I will need to map all of the IO into continuous Modbus registers that the customers DAQ system can read/write.
The M580 will need to be server to the customers DAQ ModbusTCP master.
I've done Beckhoff CX programming (ladder and st), Automation Direct P2k programming, AD Click.
Any guesses as to perceived difficulties? Any advice or quick overview of how I would do this in M580 with UnityPRO?
The programming in the CPU should not be much, basically I will need to map all of the IO into continuous Modbus registers that the customers DAQ system can read/write.
The M580 will need to be server to the customers DAQ ModbusTCP master.
I've done Beckhoff CX programming (ladder and st), Automation Direct P2k programming, AD Click.
Any guesses as to perceived difficulties? Any advice or quick overview of how I would do this in M580 with UnityPRO?