Schneider Twido - DOO32UK

[mariobo11]

Hello!

I have huge problem. Can you give me solutions fastest u can..PLEASE

Twido PLC, and digital output cards are connected ok, program is downloaded and everything seems fine,but....
when i press button who enables output 0(Q4.0), LED Q4.0 becomes green, but i dont have 24VDC on that output.

Do you know where is the problem?

PLEASE, IT IS URGENT!!!!

 

[ferjrodrigues]

Hi!

Did you conect the common wire?
See more about it in this hardware guide:

http://www.global-download.schneider-electric.com/85257578007E5C8A/all/077A2E6F90C64C35852575900069941F/$File/eio0000000028.05.pdf

Are you using Telefast?

 

[ferjrodrigues]

Man, this module are NPN!

You never will get 24v on output. You will have GND!

Take a look in the hardware guide!

 

[mariobo11]

But is says that output voltage is 24VDC?!?!?

Help please

 

[dmargineau]

http://www.plctalk.net/qanda/showthread.php?t=72839&highlight=NPN

Read the entire post...It's all there...

 

[ferjrodrigues]

Try to measure under the + of your sorce and the output of the module. Turn on and turn off the output.

 

[mariobo11]

Guys, thank you a lot. I have to use card DOO32TK to get 24VDC on output?

Thank again.

 

[ferjrodrigues]

Yes! Use the TM2DDO32TK to have PNPs outputs (24V on outputs).