Screen Change through physical input

[Nelliyan]

Hi,


I am using vijeo designer v 4.6..

Now in my HMI program i was supposed to change a screen whenever user switches from Manual mode to Auto mode..... In this case i want to do it with out touching the screen that means automatically tht screen trigger or screen change must happen....

I did this scenario in siemens HMI program.... I want to know whether it s possible in vijeo designer and if it can be how to perform the process....

Pls guide me...

Thanks in Advance

 

[iant]

I don't program the Vijeo
But
Most HMI's have a system area where you need to set the Screen Change parameters
Both to read the screen page number and to write it.
You will need to check the manual for that
The Input will need to be through a PLC