DaytonPLC
Member
Whats the best way to use a multi state indicator message bar and be able to scroll through each message after say 2 seconds.
What I'm trying to do is give the operator a tool on the HMI that will show different messages to help them figure out why something isn't happening as it should. But there may be 2, 3 or more message states that are a problem so I would like to flash a state up for several seconds then flash the next active state a few seconds later etc...
I'm using Logix5000 V20 and a Panelview 600
Thanks for any suggestions
What I'm trying to do is give the operator a tool on the HMI that will show different messages to help them figure out why something isn't happening as it should. But there may be 2, 3 or more message states that are a problem so I would like to flash a state up for several seconds then flash the next active state a few seconds later etc...
I'm using Logix5000 V20 and a Panelview 600
Thanks for any suggestions
Last edited: