shawnhimself
Member
I'm not extremely familiar with servo motors however I know there must be a better way...
In an application of ours, a servo compression unit is 'homed' by smacking against two lock collars. I believe the theory is that when the motor senses an overcurrent, it establishes 'home' position.
Feel free to school me on this. I just feel there is a better way. Using an encoder position, sensor, etc.
Thanks.
In an application of ours, a servo compression unit is 'homed' by smacking against two lock collars. I believe the theory is that when the motor senses an overcurrent, it establishes 'home' position.
Feel free to school me on this. I just feel there is a better way. Using an encoder position, sensor, etc.
Thanks.