FozzyTime
Member
Hi guys,
I have a understanding of Siemans s7 but know very little about HMI's, i really only use it for fault finding so take it easy on me if i sound stupid
I'm trying to find where a fault code is generated from, but when i got into WinCC and look at the Fault pages there blank. On the same machine, that has Siemans screens, all i need to do is go to analog alarms page and it gives me all the fault codes to the screen and what M bit gives the alarm.
This machine has ha Proface Screen and if you see the picture i have attached, the Analog Alarm section of the wincc program is blank.
Any help would be great
Thanks xoxo
I have a understanding of Siemans s7 but know very little about HMI's, i really only use it for fault finding so take it easy on me if i sound stupid
I'm trying to find where a fault code is generated from, but when i got into WinCC and look at the Fault pages there blank. On the same machine, that has Siemans screens, all i need to do is go to analog alarms page and it gives me all the fault codes to the screen and what M bit gives the alarm.
This machine has ha Proface Screen and if you see the picture i have attached, the Analog Alarm section of the wincc program is blank.
Any help would be great
Thanks xoxo