David_Emmerich
Lifetime Supporting Member
Hi everyone. We have a problem with a TI/ Siemens 545 processor
That has sat outside unpowered for a year or so. It powers up, but is not in RUN mode... and the BATT is ng. I plan on putting in a new batt in the morning, but what I need to know is how do I get it back into RUN mode? Hint: we have no software for this...:site:
That has sat outside unpowered for a year or so. It powers up, but is not in RUN mode... and the BATT is ng. I plan on putting in a new batt in the morning, but what I need to know is how do I get it back into RUN mode? Hint: we have no software for this...:site: