Siemens 611U Tuning for Servo

dripdry

Member
D
Join Date
May 2016
Location
Ohio
Posts
23
Hey all. I'm stuck trying to tune a 611U, can't find anything in Scout for the life of me. Is there some automatic parameter setup area I'm missing? Some trick to it?

The servo is running but pretty badly (it's new).
 

Similar Topics

S
Siemens 611u drive fault A508 encoder fault
We havea 100kw AC motor with HEIDENHAIN encoders ERM 280speed encoder. The motor works ok up to 500 rpm under closed loop control. Anything...
Replies
1
Views
3,719
sammmy_s
S
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
9
Views
242
mburtis
M
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
155
bkottaras
B
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
311
John Lee
J
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
121
mk42
M
Back
Top Bottom