Hello all!
I have a Siemens S7-314C 2DP Controller and I would like to network this DP Master with 4 (four) Yaskawa Frequency Drives which are DP slave enabled.
How can I just add Drives which are not Siemens products to my Profibus Network using the S7 Simatic Manager Hardware Cofiguration?
I assume that because Profibus DP is a standard, I must be able to communicate a Siemens DP Master with any other DP Slave from any vendor.
Please confirm and indicate how to install the Drives GSD on the Hardware config for S7-314C 2DP
Thanks for the Help.
I have a Siemens S7-314C 2DP Controller and I would like to network this DP Master with 4 (four) Yaskawa Frequency Drives which are DP slave enabled.
How can I just add Drives which are not Siemens products to my Profibus Network using the S7 Simatic Manager Hardware Cofiguration?
I assume that because Profibus DP is a standard, I must be able to communicate a Siemens DP Master with any other DP Slave from any vendor.
Please confirm and indicate how to install the Drives GSD on the Hardware config for S7-314C 2DP
Thanks for the Help.