Siemens RS232 PC Adapter

ruievmonteiro

Member
R
Join Date
Dec 2011
Location
Porto
Posts
18
The local connection tab, in Set PG/PC interface doesn't appear in PC Adapter MPI and in PC Adapter Profibus. It only works with usb pc Adapters.

I'm using Step 7 5.5 SP3 and all Simatic Net device drivers appear to be working properly, including PC RS232 Adapter

Does anyone know what might be the problem?
 

Similar Topics

G
Siemens S5 RS232 adapter
Hello everyone, we still have many PC's with siemens S5 running in our facility. None of our new laptops have a serial port. Has anyone had any...
Replies
3
Views
4,522
geniusintraining
geniusintraining
K
Download Siemens Protool project with USB to RS232 adapter
I'm trying to download a Siemens Protool project into a OP17 with USB to RS232 adapter. The download is starting but it interrupts at approx. 80%...
Replies
9
Views
6,658
wallypiper
W
D
Beckhoff CX5020-0120-M310 can't read data from Siemens 1SI RS232 on ET 200s
Hi i have Beckhoff (CX5020-0120-M310) (profibus master) with TC3.1 and want communicate with Siemens Profibus ET 200S (IM151) DPV1. All modules...
Replies
1
Views
1,701
sigmadelta
S
M
Swapping Siemens CP 341 rs232 to CP 341 rs485
HI All, does anyone know if you have to change a cp 341 rs232 and use a cp341 rs485, what changes have to be made to get it to...
Replies
0
Views
1,346
maico
M
dburnum
Siemens APACS+ w/MODBUS RS232/485
Having an issue in which trying to communicate via modbus on an ACM+. I made the redundant serial cable myself, and verified it with my...
Replies
4
Views
2,417
dburnum
dburnum
Back
Top Bottom