udtwmc
Member
Hi all,
Hardware: siemens S400 /profibus dp/ ET200s/ IM 151-1
Software: PC using Step7 v5.4 sp2
I'm trying to add more hardware onto an existing IM151-1 but it ain't having it!
Ive successfully configured/download several I/O modules to another node on the same network so I have a fair idea with what I'm doing.
The fault arises after I download a PM-D F1 siguard, three direct motor starters and a PM-X module.
Here's some screenshots... (Couldn't post all in one go)
I've added on slots 7 to 11 (with 1-6 existing)
see next post...
Hardware: siemens S400 /profibus dp/ ET200s/ IM 151-1
Software: PC using Step7 v5.4 sp2
I'm trying to add more hardware onto an existing IM151-1 but it ain't having it!
Ive successfully configured/download several I/O modules to another node on the same network so I have a fair idea with what I'm doing.
The fault arises after I download a PM-D F1 siguard, three direct motor starters and a PM-X module.
Here's some screenshots... (Couldn't post all in one go)
I've added on slots 7 to 11 (with 1-6 existing)
see next post...
Last edited: