Siemens S5 and Pilz PXT 305 COM-LC

heineman

Member
H
Join Date
Mar 2004
Posts
4
I have a Siemens S5-100U CPU103 and want to connect it with a Pilz machine interface PXT 305 COM-LC. To program the Pilz I use PXPRO. I have a manual for the plain software but nothing in it about codes etc. to control the Pilz/S5 combination (for example how to get a QW from the S5 on the Pilz screen or a Pilz key input as IW in the S5). Has anyone out there some experience with this combination and is willing to share it with me. I like to have some examples (applications) written in PXPRO so that I can learn from it and make my one application.
Thanks in advance, Martin
 

Similar Topics

E
Pilz Safety Magnetic Door-Switchs to Siemens S7F CPU
Hello Everbody. We are going to be performing a revamping project on an existing plant. In the mean time we are going to upgrade the "old" Pilz...
Replies
0
Views
2,835
erdemsvri
E
J
Siemens PLC Help
HI everyone, i am new to Siemens plc programming and i am in need of some help. yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Replies
5
Views
90
James Mcquade
J
Itshouldwork
A way to detect online, hardware and software changes of Siemens TIA Portal V17
Hi PLC people, think about this scenario: The PLC is somehow connected to the same network with the facilities` network. Then someone connects to...
Replies
2
Views
62
mk42
M
M
ISSUES ASSIGNING PROFISAFE ADDRESS TO SIEMENS ET200ECO PN IO MODULE
Hello everyone, I've had this issue for the last 2 days where I try to assign the profisafe address to an IO block (6ES7 146-6FF00-0AB0) but when...
Replies
5
Views
141
baref00t25
B
P
SOFTWARE TIA PORTAL V14 - PLC SIEMENS
Hello, good morning, I have been having two problems with the Tia Portal software. The first is that I have installed it on my computer and...
Replies
5
Views
174
tdoa
T
Back
Top Bottom