Hi, I have a 1214 on ip 192.168.0.100. This is connected to other modules through a switch on same network. I need to connect this to a company server on 10.16.0.173. To get a separate port I have installed a CP2341 module . Does any one have any programming examples or info on how to program this module. Thanks.
Siemens S7 1200 CP2341 ethernet
- Thread starter mrtoastie
- Start date
tarik1978
Member
Similar Topics
Hi all,
Currently having trouble getting a speed reference to write over modbus to an Omron M1...
I can successfully write a run command and...
commentaire communiqué siemens s7-1200 avec vfd delta ? (cablage et sur tia portal )
Hi Experts,
I would like to make firmware upgrade from v3.0 to v4.5 (S7-1200 CPU 1215C).
Can I do it from v3.0 to v4.5?
Do I need to take some...
Hi Guys, I am trying to establish communication over profinet between Siemens S7-1200 PLC as IO device and codesys plc as IO controller. But I am...
Which signals do I have to use to get data from camera. For example camera detects a defect and sends signal to controller.
Power cable: CCB-PWRIO-05