I'm trying to set the clock in the PLC based on the time/date that's set on the HMI. So far this doesn't appear an easy thing to do with Siemens, does anyone have any pointers or online links to help files etc that could help? Thanks in advance.
Siemens Simatic OP270 HMI to S7-300 PLC Clock Sync
- Thread starter Andy S
- Start date
Similar Topics
Hi Guys,
I have setup some trending for a process that I'm working with using a Siemens Simatic OP270 Touch screen display. So far so good, but...
Hello All,
I need to change the page on a Siemens OP270B Display from the PLC. I understand that within the “Area Pointers” section it’s possible...
Hello All,
I’m tackling an application where I need a user to enter a password on a Siemens OP270B display to login and gain supervisor...
Good Evening ,
It has been several years since I used Siemens Software . I’m looking to
purchase the software for a Siemens Simatic S7...
I'm just trying to figure out the right method of adding a DO card to an existing rack. It's not the *next* open slot, but I have to move the AO...