Siemens Sinamics v20 Inverter

[eebads2391]

Hi ,

A little off topic , hope you don't mind

I have a Siemens Sinamics V20 Inverter

On a 0 - 10 v analogue input as a speed reference
How can I get it to ignore the first 3 volts

I can't find the parameters for this

Any pointers / help gratefully recieved

Many thanks

Mike

 

[Steve Bailey]

I don't have any hands-on experience with that particular drive, but I'd look for a "minimum speed" parameter.

 

[L D[AR2P#0.0]]

Example from manual:


https://cache.industry.siemens.com/...erating_instructions_complete_en-US_en-US.pdf

 

[eebads2391]

That looks like the ones
Thank you

 

[eebads2391]

Hi Steve ,
I set a minimum speed of 11hz , so when it switches on it runs at 11hz
when the voltage is applied to the analogue input

However , I need the inverter to ignore the incoming voltage until 3v or above

I think the second reply above gave the parameters to explore

Thanks