SIMATIC Lag/Delay Function Block

Mehdi

Member
M
Join Date
Dec 2005
Location
Tehran
Posts
53
Hi Guys,

I tried to put some delays/lag in output of a PID controller in Simatic. But I couldn't find any suitable function block there nor any setting in PID block. Please advice.

Mehdi
 

Similar Topics

A
Simatic Manager Flag Addressing
In simatic manager(s7-300 cpu) I can assign memory addressing up to 256 (i.e MW256 or M256.x). But when I am going above 256 range & downloading...
Replies
5
Views
2,464
Ashwini Sahoo
A
A
Simatic ET200SP DI module triggering line stop even though no body press this line stop button
We are facing intermittent issue with emergency stop and line stop. Line stop triggering with alarm of line stop push button activated at one...
Replies
1
Views
31
robertmee
R
J
PLC SIMATIC S7 1200 / KOP/SCL question
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
100
jimix
J
R
SIMATIC 300, CPU 315-2DP , (6ES7 315-2AF03-0AB0) VIPA 603-1CC21 A1.0 error coming
Dear sir, I am using SIMATIC 300, CPU 315-2DP , (6ES7 315-2AF03-0AB0) VIPA 603-1CC21 A1.0 RAM 32KB, Firmware=V4.0.8 The problem Im using MPI...
Replies
2
Views
178
Rakesharya
R
E
SIMATIC S7-300 not running
Hi, I received this SIMATIC S7-300 training kit for maintenance. When I power it up, the PLC doesn't go to RUN mode and the STOP mode led is...
Replies
7
Views
314
AlfredoQuintero
A
Back
Top Bottom